Sony STR-DA3600ES - Quick Click Settings

123
GB
Adjusting Settings
x ON
The network function works even when the
receiver is in standby mode.
In addition, the start-up time of the network
function is reduced after the receiver is turned
on.
Quick Click settings
You can make settings to control components
connected to the receiver using an external
control device.
See “For Installation Purposes: Operating
Each Component Using an External Control
Device (Quick Click)” (page 133) for details.
Selects the source component that is to be
operated.
x Preset Mode
Customizes the remote to match the source
components connected to your receiver.
x Learn Mode
Allows the remote learn codes.
x Reset
Resets both programmed codes and learned
codes.
Selects the common component such as a TV,
projector or lights that is to be operated.
x Preset Mode
Customizes the remote to match the common
components such as the TV, the projector and
the lightings connected to your receiver.
x Learn Mode
Allows the remote to learn codes.
x Reset
Resets both programmed codes and learned
codes.
Sets several commands in a sequential order as
a single command.
Source Component
Common Component
Macro