28
Playback/Recording
To change a preset station
Preset a new station at the number you want to change.
Note
If the AC power cord is disconnected for about 1 week, the
preset stations will be cleared. Preset the stations again.
Tuning preset stations (Preset Tuning)
1 Click FUNCTION in the main menu, then click
TUNER.
2 Click LIST.
3 Click A B C repeatedly to select the page, then
click the number button (0 to 9) of the station you
want.
z To recall preset stations from the SUB menu
Click SUB, then click A B C repeatedly to select the
page, and then click the number button (0 to 9).
Presetting the radio stations
The receiver can store a total of 30 FM or AM stations.
You can store up to 10 stations in three different
“pages”: A, B and C, and recall them later with a
simple click. You can also assign names to the preset
stations (see page 39).
1 Tune in the station you want.
2 Click LIST.
The memory list appears.
3 Click A B C repeatedly to select the page (A, B, or
C) you want.
4 Click MEMORY.
MEMORY turns red.
5 Click the number button (0 to 9) you want.
The number button lights up and the station is
stored.
6 Repeat steps 1 to 5 to preset up to 30 stations.
You can also use + or – next to the frequency to
tune stations from the LIST menu.
USERSUBLIST
+–
FM/AM
FM 102.50
M
H
z
STEREO
+–
FM/AM
FM 102.50
M
H
z
STEREO
A B C MEMORY
EXIT
To Next Page
Loading...
