Sony STR-DE885 - User Manual

Other manuals for Sony STR-DE885

Service Manual72 pages

Specifications2 pages

Dimensions1 page

Questions and Answers

R
richardgreenAug 28, 2025
Why can't I tune into radio stations on my Sony Stereo Receiver?
- K
  Kristy HernandezAug 28, 2025
  If radio stations cannot be tuned in on your Sony Stereo Receiver, check that the antennas are securely connected. Adjust the antennas and connect an external antenna if necessary. If the signal strength of the stations is too weak, use direct tuning. Make sure you set the tuning interval correctly (when tuning in AM stations with direct tuning). Preset the stations if no stations have been preset or the preset stations have been cleared. Press DISPLAY so that the frequency appears in the display.
S
Stephen AndersenAug 27, 2025
What to do if there is no sound from a specific component on my Sony Stereo Receiver?
- M
  mccartyhollyAug 27, 2025
  If there's no sound from a specific component connected to your Sony Stereo Receiver, check that the component is correctly connected to the appropriate audio input jacks. Ensure the cords used for the connection are fully inserted into the jacks on both the receiver and the component. Also, verify that you have selected the correct component on the receiver.
A
Ashley MorrisAug 26, 2025
How to improve FM reception on my Sony Stereo Receiver?
- M
  Melissa HernandezAug 26, 2025
  If the FM reception on your Sony Stereo Receiver is poor, try connecting the receiver to an outdoor FM antenna using a 75-ohm coaxial cable (not supplied). Ensure the outdoor antenna is grounded against lightning, but do not connect the ground wire to a gas pipe to prevent gas explosion. If the signal strength of the stations is too weak, use direct tuning. Make sure you set the tuning interval correctly (when tuning in AM stations with direct tuning). Preset the stations if no stations have been preset or the preset stations have been cleared. Press DISPLAY so that the frequency appears in the display.
J
Julie RiggsAug 25, 2025
How to fix hum or noise on Sony Stereo Receiver?
- B
  Brandi BooneAug 26, 2025
  If you're experiencing severe hum or noise with your Sony Stereo Receiver, first ensure that the speakers and components are securely connected. Check that connecting cords are away from transformers, motors, TVs, or fluorescent lights (at least 3 meters away). Move your TV further from the audio components. If you have a turntable connected, ensure the U SIGNAL GND terminal is grounded. Finally, clean the plugs and jacks with a cloth slightly moistened with alcohol.
P
patricia40Aug 25, 2025
Why is my Sony Stereo Receiver remote not working?
- S
  susanreynoldsAug 25, 2025
  If your Sony Stereo Receiver remote isn't working, ensure you're pointing it at the remote sensor on the receiver and that there are no obstacles in the way. Verify the remote's mode matches the receiver's. If the batteries are weak, replace them. Also, make sure you've selected the correct function on the remote. Note that the AUX, SOURCE, MPX/DUAL, 12 and ON SCREEN buttons on the remote are not available. Press MAIN MENU on the remote before you use the V/v/B/b buttons for receiver operation.

Summary

Safety and Precautions

Hooking Up the Components

Antenna Hookups

Instructions for connecting FM and AM antennas to the receiver.

Audio Component Hookups

Diagrams and instructions for connecting audio sources like turntables, CD players, and tape decks.

Video Component Hookups

Guidelines for connecting video sources like TVs, VCRs, and DVD players.

Digital Component Hookups

How to connect digital audio sources like DVD and satellite tuners for surround sound.

Hooking Up and Setting Up the Speaker System

Speaker System Hookups

Connecting front, surround, center, and subwoofer speakers to the receiver.

Performing Initial Setup Operations

Clearing the Receivers Memory

Resetting all receiver settings to factory defaults.

Specifying the Speaker Parameters

Adjusting speaker settings like size, distance, and crossover frequencies.

Front Speaker Size

Setting the size (LARGE/SMALL/NO) for front speakers and its implications.

Center Speaker Size

Setting the size (LARGE/SMALL/NO) for the center speaker.

Surround Speaker Size

Setting the size (LARGE/SMALL/NO) for surround speakers.

Sub Woofer Selection

Selecting YES or NO for sub woofer connection and its effect on bass redirection.

Front Speaker Distance

Setting the distance from listening position to front speakers.

Center Speaker Distance

Setting the distance from listening position to the center speaker.

Surround Speaker Distance

Setting the distance from listening position to surround speakers.

Adjusting the Speaker Level

Checking the Connections

Verifying that all component and speaker connections are correct.

Basic Operations

Selecting the Component

Choosing the input source or component to use.

Enjoying Surround Sound

Automatically Decoding the Input Audio Signal

Auto-detecting and decoding various audio signal formats.

Selecting a Sound Field

Choosing from pre-programmed sound fields for different listening experiences.

Enjoying Movies with Cinema Studio EX

Using Cinema Studio EX modes to reproduce movie theater sound characteristics.

Selecting Other Sound Fields

Choosing from a variety of sound fields like Mono Movie, Stereo Movie, Concert Hall, etc.

Selecting the Surround Back Decoding Mode (SURR BACK DECODING)

Choosing the decoding mode for surround back signals for 6.1 channel sound.

Customizing Sound Fields

Adjusting the Surround Parameters

Customizing surround effects like effect level, wall type, and reverberation.

Effect Level

Adjusting the overall presence of the surround effect.

Adjusting the Level Parameters

Front Balance

Adjusting the balance between front left and right speakers.

Dynamic Range Compressor

Adjusting the Equalizer

Adjusting bass, midrange, and treble for each speaker and sound field.

Surround Speaker Adjustments

Adjusting bass and treble levels for surround and surround back speakers.

Receiving Broadcasts

Direct Tuning

Manually entering radio station frequencies for tuning.

Automatic Tuning

Scanning for available radio stations automatically.

Preset Tuning

Other Operations

Adjustments using the CUSTOMIZE button

2 ch Decode Mode

Surround Back Decoding Mode

Operations Using the Remote

Remote Button Description

Overview of buttons on the RM-PG411 and RM-PP411 remotes.

Programming the Remote

Learning remote control codes for non-Sony or unsupported components.

Learning the Commands of Your Components

Activating Learned Functions

Performing Several Commands in Sequence Automatically (Macro Play)

Additional Information

Precautions

Safety, power source, heat, placement, operation, and cleaning guidelines.

Troubleshooting

Common problems and solutions for audio, connection, and recording issues.

Specifications

Audio Power Specifications

Details on power output, harmonic distortion, and frequency response.

AM Tuner Section

Tables of Settings using SURR, LEVEL, EQ, SET UP and CUSTOMIZE Buttons

LEVEL Button Settings

EQ Button Settings

SET UP Button Settings

CUSTOMIZE Button Settings

Sony STR-DE885 Specifications

General

Channels	5.1
Total Harmonic Distortion (THD)	0.09 %
Frequency Response	10 Hz - 100 kHz
Inputs	4 x Audio, 2 x Digital Optical, 2 x Digital Coaxial, 1 x Phono, 1 x Video
Weight	13.2 kg
Input sensitivity	200 mV
Output	100 W per channel
Speaker load impedance	8 ohms
Speaker Impedance	8 ohms
Preset Stations	30
Tuning range	AM/FM
Power Output (RMS)	100W per channel
Power output	100W per channel
Outputs	1 x Audio, 1 x Video
Signal to noise ratio	> 98 dB
Digital inputs	coaxial, optical
Dimensions	43 cm x 40.1 cm x 15.75 cm
Signal-to-Noise Ratio	> 98 dB
Tuner Type	AM/FM
Audio Inputs/Outputs	4 x Audio Inputs, 1 x Audio Output
Digital Audio Inputs	Coaxial, Optical
Video Inputs/Outputs	3 inputs, 1 output