EasyManua.ls Logo

Sony STR-DE897 - Specifications; Audio Power Specifications

Sony STR-DE897
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
masterpage:Left
lename[D:\foreigner\SEM_Janet\Revised
D
E897_Data\J9031709_4253072111DE897U\4253072111\GB09ADD_STR-DE897-U.fm]
58
GB
model name1[STR-DE897]
[4-253-072-11(1)]
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(Models of area code U only)
With 8 ohm loads, both channels driven, from
20 – 20,000 Hz; rated 100 watts per channel
minimum RMS power, with no more than
0.09% total harmonic distortion from 250
milliwatts to rated output.
Amplifier section
Power Output
Models of area code U, CA
Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.09%)
100 W + 100 W
1)
Reference Power Output
1)
(8 ohms 20 Hz – 20 kHz, THD 0.09%)
FRONT
2)
: 100 W/ch
CENTER
2)
: 100 W
SURR
2)
: 100 W/ch
SURR BACK
2)
: 100 W/ch
(8 ohms 1 kHz, THD 0.7%)
FRONT
2)
: 110 W/ch
CENTER
2)
: 110 W
SURR
2)
: 110 W/ch
SURR BACK
2)
: 110 W/ch
Models of area code E2/E3
Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7%)
110 W + 110 W
1)
Reference Power Output
1)
(8 ohms 1 kHz, THD 10%)
FRONT
2)
: 130 W/ch
CENTER
2)
: 130 W
SURR
2)
: 130 W/ch
SURR BACK
2)
: 130 W/ch
Models of area code AR
Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7%)
110 W + 110 W
1)
100 W + 100 W
3)
Reference Power Output
1)
(8 ohms 1 kHz, THD 10%)
FRONT
2)
: 130 W/ch
CENTER
2)
: 130 W
SURR
2)
: 130 W/ch
SURR BACK
2)
: 130 W/ch
1)
Measured under the following conditions:
2)
Depending on the sound field settings and the
source, there may be no sound output.
3)
Measured under the following conditions:
Frequency response
Inputs (Analog)
4)
INPUT SHORT (with sound field and equalizer
bypassed).
5)
Weighted network, input level.
Inputs (Digital)
Outputs (Analog)
Specifications
Area code Power requirements
U, CA 120 V AC, 60 Hz
E2/E3 240 V AC, 50 Hz
AR 230 V AC, 50 Hz
Area code Power requirements
AR 220 V AC, 50 Hz
PHONO RIAA equalization curve
±0.5 dB
MULTI CH IN 1, 2,
SA-CD/CD, TV/SAT,
MD/TAPE, DVD,
VIDEO 1, 2, 3
10 Hz – 70 kHz
+0.5/–2 dB (with sound
field and equalizer
bypassed)
PHONO Sensitivity: 8 mV
Impedance: 50 kiloohms
S/N
4)
: 86 dB
(A, 8 mV
5)
)
MULTI CH IN 1, 2,
SA-CD/CD, TV/SAT,
MD/TAPE, DVD,
VIDEO 1, 2, 3
Sensitivity: 500 mV
Impedance: 50 kiloohms
S/N
4)
: 96 dB
(A, 500 mV
5)
)
DVD, SA-CD/CD
(Coaxial)
Sensitivity: –
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
TV/SAT, SA-CD/CD,
MD/TAPE, VIDEO 3
(Optical)
Sensitivity: –
Impedance: –
S/N: 100 dB
(A, 20 kHz LPF)
MD/TAPE (OUT),
VIDEO 1, 2
(AUDIO OUT)
Voltage: 500 mV
Impedance: 10 kiloohms
SUB WOOFER Voltage: 2 V
Impedance: 1 kiloohms
GB01COV_STR-DE897-U.book Page 58 Wednesday, March 3, 2004 4:29 PM

Table of Contents

Other manuals for Sony STR-DE897

Related product manuals