59
STR-DG710
Pin No . Pin Name I/O Pin Descr iption
100 HD IN O HD signal output from digital signal processor
101 HD CLK O HD serial clock signal output from digital signal processor
102
FLASH2/C LINK
I Flash signal input
UART RX(MICLO)
103
FLASH1/C LINK
O Flash signal output
UART TX(MOCLI)
104 C LINK DET I DMPORT link detect signal input
105 DA1 I Not used in this set. (Open)
106 DA0 I Not used in this set. (Open)
107 DAVS — Ground pin
108 DAVC I Power supply pin (+3.3 V) for D/A converter
109 AVCC I Analog power supply pin (+3.3 V) for A/D converter
110 AVRH I Standard power supply pin (+3.3 V) for A/D converter
111 AVSS/AVRL — Analog ground pin for A/D converter
112 VSS — Ground pin
113 DCAC IN I DCAC IN signal input
114 AD KEY1 I AD key signal input 1
115 AD KEY2 I AD key signal input 2
116 VERSION I Not used in this set. (Connect to GND.)
117 TUNER SD I Tuner SD signal input
118 MODEL I Model select signal input (Connect to GND in this set.)
119 VACS CTRL I VACS control signal input
120 NO USE I Not used.
To Next Page
Loading...
