Sony STR-DG720 - Tuner Operations: Station Management; Naming Preset Radio Stations

VIDE01 VIDED2 ~ OVO
00,·~,,'0
SAT· TV' SA·eOlCD TUNER 1
0'00 ~
Naming preset ,stations '
,. .'.. ,- '. - -,' . . ""',' , .... ',',- .. : .. ,,' ... , .. ,"", ' .. '-~'
4·7~'1.
To create an index name
1 Use +1+1.1. to create an index name.
Press
+1+ to select a character, then press
.1. to move the cursor to the next position.
If you made a mistake
Press .1. until the character you want to
change flashes, then press
+1+ to select the
correct character.
Tips
• You can select the character type as follows by
pressing +1+.
Alphabet (upper case) -+ Numbers-+
Symbols
• To enter a blank space,
press. without
selecting a character.
2 Press 8.
The entered name is registered.
1 Press TUNER repeatedly to
select the
FM or AM band.
You can also use INPUT SELECTOR on
the receiver.
2 Tune in the preset station you
want to create an index name
for (page 59).
3 Press AMP MENU.
"I-LEVEL" appears on the display.
4 Press .1+ repeatedly to select
"4-TUNER".
5 Press CD or + to enter the
menu.
6 Press .1+ repeatedly to select
"NAME IN".
7 Press CD or + to enter the
parameter.
The cursor flashes and you can select a
character. Follow the procedure given
in
"To create an index name" below.
60
US