71
US
F:\Sony SEM
HA\Revision2_DG800\JC060412_2667346121DG800_US\2667346121\US05AMP_STR-DG800-
CEL.fm
masterpage: Right
STR-DG800
2-667-346-12 (1)
Tuner Operations
Using the controls on the
receiver
1 Turn INPUT SELECTOR to select the FM
or AM band.
2 Press TUNING MODE repeatedly to select
“PRESET TUNING”.
3 Turn TUNING +/– to select the preset
station you want.
1 Press TUNER repeatedly to
select the FM or AM band.
You can also use INPUT SELECTOR on
the receiver.
2 Tune in the preset station you
want to create an index name
for (page 70).
3 Press AMP, and then press
MENU.
“1-LEVEL SET” appears on the display.
4 Press control button V/v
repeatedly to select “4-TUNER
SET”.
5 Press the control button or
control button b to enter the
menu.
6 Press control button V/v
repeatedly to select “NAME IN”.
7 Press the control button or
control button b to enter the
parameter.
The cursor flashes and you can select a
character. Follow the procedure given in
“To create an index name” below.
To return to the previous display
Press control button B.
To create an index name
1 Use control button V/v/B/b to create an
index name.
Press control button V/v to select a
character, then press control button B/b to
move the cursor to the next position.
If you made a mistake
Press control button B/b until the character
you want to change flashes, then press
control button V/v to select the correct
character.
Tip
You can select the character type as follows by
pressing control button V/v.
Alphabet (upper case) t Numbers t Symbols
2 Press the control button.
The entered name is registered.
Naming preset stations
DISPLAY TOOLS
RETURN/
EXIT
AMP
TV/SAT
MD/TAPE
TUNER
PHONO
2ND ZONE
2CH A.F.D. MOVIE MUSIC
SLEEP
CATEGORY
MODE
D. TUNING AUTO CAL
SA-CD/CD
MEMORY
MULTI CH SOURCE
B
B
V
v
MENU
CLEAR
>10
–
/
– –
23
456
789
ENTER
0/10
1
3
1
4-7
US01COV_STR-DG800-CEL.book Page 71 Tuesday, March 14, 2006 3:53 PM
To Next Page
Loading...
