84
US
Changing the display
You can check the sound field, etc., by
changing the information on the display.
Press DISPLAY repeatedly.
Each time you press DISPLAY, the display
will change cyclically as follows.
Input name you selected* t Original input
name t Sound field currently applied t
Vo l u m e t Stream information
FM and AM band
Preset station name* t Frequency t Sound
field currently applied t Vo l u m e
* Index name appears only when you have assigned
one to the input or preset station. Index name does
not appear when only blank spaces have been
entered.
Note
Character or marks may not be displayed for some
languages.
Tip
You cannot switch the display while “GUI MODE”
is shown on the display. Press GUI MODE
repeatedly to select “GUI OFF”.
To Next Page
Loading...
