23
GB
Connection and Preparation
Make sure that metal fittings of Hi/Lo attached to the speakers have been removed from the speakers to
avoid receiver malfunction.
If you select [Front Surround] for the sound field setting, you can enjoy surround effects
equivalent to that of a 5.1-channel speaker system using only the two front speakers.
Place the speakers as shown below and change the direction of the front speakers little by
little to find the direction that provides the best surround effect.
Note
2.1-channel speaker system
30˚ 1.5 m – 3 m
Set the height of a tweeter of the front
speaker at the same height as your ears.
Speaker cable (not supplied)
Monaural audio cable (not supplied)
To Next Page
Loading...
