79
US
Tuner Operations
10Press V/v repeatedly to select “LOCK
OFF”, then press .
“CODE x” appears on the display.
11Press SHIFT.
12Enter your 4-digit lock code using the
numeric buttons.
“UNLOCKED” appears on the display.
Notes
• When you select a channel using Category Tuning,
locked channels are skipped.
• When the receiver is reset to the factory settings,
the lock code returns to the default (0000), but the
Parental Lock settings are not removed.
• You cannot preset locked channels. If you set the
Parental Lock for a preset channel, the preset
information for that channel returns to the default.
• You cannot set the Parental Lock for channel 0 or
channel 184.
continued
To Next Page
Loading...
