90
GB
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm masterpage: Left
STR-DN1010
4-174-068-11(1)
Setting menu list
Auto Calibration menu
You can make settings for the Auto
Calibration function to suit your preference.
Lets you perform Auto Calibration. For
details, see “2: Performing Auto Calibration”
(page 40).
Lets you select the Auto Calibration type for
each seating position. For details, see step 4 of
“3: Confirming/saving the measurement
results” (page 41).
Note
You can select this parameter only when you have
performed the Auto Calibration and saved the
measurement result.
You can register 3 patterns as Position 1, 2,
and 3, depending on the listening position,
listening environment, and measurement
conditions.
Menu Description
Auto Cal. Sets the speaker level or
distance and makes the
measurement automatically
(page 90).
Speaker Sets the speaker position
manually (page 91).
Surround Adjusts the sound field
(surround effect) you choose
(page 95).
EQ Adjusts the equalizer (bass/
treble sound) (page 96).
Audio Sets various sound items
(page 96).
Video Adjusts the resolution of
analog video signals (page
97).
HDMI Makes settings for sound/
images from components
connected to the HDMI jacks
(page 98).
System Sets the receiver switch to
standby mode automatically
(page 100).
S-AIR Makes settings for S-AIR
operations (page 75).
Auto Cal. Start (Auto Calibration
start)
Auto Cal. Type (Auto Calibration
type)
Position
To Next Page
Loading...
Need help?
General
