Sony STR-DN610 User Manual (English)

Other manuals for Sony STR-DN610

Questions and Answers:

R
Robert MillerAug 21, 2025
What to do if there is no sound from digital sources on Sony Receiver?
- N
  Natalie MorrisAug 21, 2025
  If your Sony Receiver isn't producing sound from digital sources connected to the COAXIAL or OPTICAL input, make sure the INPUT MODE isn't set to "ANALOG". Also, ensure that the Analog Direct function is not selected. Check that the “A. ASSIGN” function is not used to reassign the audio input of another source to the selected input. If you're using the TV OPTICAL IN jack during TV input, set “ARC” to “ARC OFF”.
E
Edgar HarrisAug 23, 2025
Why is there no sound from the subwoofer on my Sony Receiver?
- T
  Terry MartinezAug 25, 2025
  If there's no sound from the subwoofer connected to your Sony Receiver, verify that the subwoofer is connected correctly and securely. Ensure that your subwoofer is turned on. Keep in mind that depending on the selected sound field, there might be no sound output from the subwoofer. Also, when all speakers are set to “LARGE” and “NEO6 CIN” or “NEO6 MUS” is selected, there will be no sound from the subwoofer.
K
kristina59Aug 26, 2025
How to fix unbalanced sound on Sony Receiver?
- M
  Morgan GoldenAug 26, 2025
  If the left and right sounds are unbalanced or reversed on your Sony Receiver, check that the speakers and components are connected correctly and securely. You can also adjust the level parameters using the LEVEL menu.
D
Daniel SteeleAug 27, 2025
What to do if HDMI sound is not outputting on Sony STR-DN610 Receiver?
- J
  James ClarkAug 28, 2025
  If the source sound input to the HDMI jack is not output from the Sony Receiver or the TV speaker, check the HDMI connection. Note that you cannot listen to Super Audio CDs by connecting via HDMI. Depending on the playback component, you may need to set up the component; refer to its operating instructions. Use a High Speed HDMI cable for viewing images or listening to sound during Deep Color transmission.
H
Harold PaulSep 1, 2025
How to fix severe hum or noise on Sony STR-DN610 Receiver?
- M
  Melissa RodriguezSep 1, 2025
  If you're experiencing severe humming or noise with your Sony Receiver, ensure the speakers and components are securely connected. Keep connecting cords away from transformers, motors, TVs, or fluorescent lights (at least 10 feet away). Try moving your audio components away from the TV. Also, clean the plugs and jacks with a cloth slightly moistened with alcohol.
K
Kimberly SmithSep 3, 2025
What to do if Sony STR-DN610 Receiver remote is not working?
- M
  Miss Shirley GomezSep 3, 2025
  If your Sony Receiver remote isn't working, first point the remote directly at the remote sensor on the receiver. Make sure there are no obstructions between the remote and the receiver. If the batteries are weak, replace them with new ones. Also, ensure you've selected the correct input on the remote.
M
Melissa JohnsonSep 5, 2025
Why Dolby Digital or DTS sound is not working on Sony Receiver?
- M
  michaelrichardsonSep 5, 2025
  If Dolby Digital or DTS multi-channel sound isn't being reproduced on your Sony Receiver, verify that the DVD, etc., you are playing is recorded in Dolby Digital or DTS format. When connecting a DVD player to the digital input jacks, check the audio setting (audio output settings) of the connected component. For example, when connecting a “PlayStation 3”, set the BD/DVD audio output format to “Bitstream” on the “PlayStation 3”. Also, set “AUDIO.OUT” to “AMP” in the HDMI menu.
H
huntercarlSep 7, 2025
How to resolve no or unclear picture on Sony STR-DN610 Receiver?
- D
  Donna DavisSep 7, 2025
  If there is no picture or the picture is unclear on the TV screen or monitor connected to your Sony Receiver, select the appropriate input using the input buttons. Set your TV to the appropriate input mode. Move your audio components away from the TV. Note that depending on the DIGITAL MEDIA PORT adapter, video output may not be possible.
D
David LoganSep 9, 2025
What to do if no sound from DIGITAL MEDIA PORT adapter on Sony STR-DN610 Receiver?
- M
  Mrs. Rachel JenningsSep 9, 2025
  If no sound is coming from a component connected to the DIGITAL MEDIA PORT adapter on your Sony Receiver, try adjusting the receiver's volume. Ensure the DIGITAL MEDIA PORT adapter and/or component is connected correctly by turning off the receiver and reconnecting them. Verify that the DIGITAL MEDIA PORT adapter and component are compatible with this receiver.
J
Joshua ConnerAug 19, 2025
How to troubleshoot no sound from one front speaker on Sony STR-DN610 Receiver?

Sony STR-DN610 Specifications

General

AirPlay	No
Display	VFL
Equalizer	Yes
Product color	Black
Audio decoders	Dolby Digital, Dolby Digital EX, Dolby Pro Logic, Dolby Pro Logic II, Dolby Pro Logic IIx, DTS, DTS 96/24, DTS Neo:6, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1)
Apple docking compatibility	Not supported
Impedance	8 Ω
Receiver type	Surround
Audio output channels	7.1 channels
Total Harmonic Distortion (THD)	1 %
Power output per channel (20-20KHz@8 Ohm)	100 W
Supported radio bands	AM, FM
Digital audio optical in	1
Component video (YPbPr/YCbCr) in	3
Connectivity technology	Wired
Speakers connectivity type	-
Headphone connectivity	3.5 mm