To Next PageTo Next Page
Need help?Do you have a question about the Sony STR-DN1010 and is the answer not in the manual?
General| Impedance | 8 Ω |
|---|---|
| Audio output channels | 7.1 channels |
| HDMI | Yes |
| Output power | 200 W |
| Dimensions (WxDxH) | 430 x 157.5 x 324.5 mm |
| Supported video modes | 1080p |
| Product color | Black |
| Connectivity technology | Wired |
| Headphone outputs | 1 |
| Component video (YPbPr/YCbCr) in | 3 |
Details audio power, output, and amplifier specifications for various models.
Lists available models (US, Canadian, AEP, UK, Australian) for the receiver.
Outlines safety checks after service, including AC leakage testing methods.
Alerts to critical safety components requiring specific replacement parts.
Notes on chip replacement, error messages, protector mode, and initialization.
Outlines the sequence for disassembling the receiver unit step-by-step.
Details the procedure for removing the receiver's case and front panel.
Provides steps for disassembling the back panel and removing the standby DCDC board.
Explains how to remove the digital, video, main block, and main boards.
Covers Shipment, All Clear, User Initialize, and Sound Field Clear modes.
Tests fluorescent display segments and command/swap modes.
Includes Sirius Factory, History, DMPORT, Software Version, and Key Check modes.
Covers SPDIF Update, Version Check, SPDIF Update Check, and DCAC Test modes.
Adjusts the standard of the video input signal for optimal display.
Guides calibration using color pattern generator or Blu-ray disc player.
Verifies the FM tuner's auto stop function by scanning signals.
Illustrates the physical location of all major circuit boards within the unit.
Shows system architecture and signal flow for key sections (MAIN, DIGITAL VIDEO, VIDEO, DSP, AUDIO, PANEL).
Component layout for DIGITAL, MAIN, DIGITAL VIDEO, DSP, SAIR, HEADPHONE, VIDEO, THERMAL SENSOR, CONNECTION boards.
Detailed circuit schematics for DIGITAL, MAIN, DIGITAL VIDEO, DSP, SAIR, HEADPHONE, VIDEO, THERMAL SENSOR, CONNECTION boards.
Block diagrams for operational amplifiers, multiplexers, and audio interface ICs.
Block diagrams for digital interface, D/A converters, and video controllers.
Block diagrams for power amplifier ICs and HDMI transmitters/receivers.
Block diagrams for HDMI controllers, system controllers, and voltage regulators.
Block diagrams for video processors, standby power ICs, and audio amplifiers.
Lists pin functions for IC2018 (SYSTEM CONTROLLER).
Describes pin functions for IC3000 (HDMI CONTROLLER).
Lists pin functions for IC3202 (VIDEO DEINTERLACING).
Describes pin functions for IC3201 (VIDEO CONTROLLER).
Lists pin functions for IC3501 (HDMI TRANSMITTER).
Lists pin functions for IC5001 (DSP).
Shows an exploded view of the receiver's case and related parts.
Provides an exploded view of the front panel assembly.
Shows an exploded view of the back panel and its components.
Illustrates the main chassis and internal mounting parts.
Details the heatsink assembly and related components.
Lists components for the connection board, including capacitors, connectors, ICs, and resistors.
Lists capacitors and connectors for the DIGITAL board.
Lists diodes, ICs, coils, transistors, and resistors for DIGITAL VIDEO board.
Lists connectors, ICs, jacks, resistors, and transistors for the MAIN board.
Lists accessories such as remote controls, microphones, and manuals.
