What to do if Sony STR-DN1030 GUI menu does not appear on the TV screen?
If the GUI menu does not appear on the TV screen, press GUI MODE repeatedly to select 'GUI ON'. If the GUI menu still does not appear on the TV screen, press MENU.
What to do if there is no sound from my Sony Receiver?
If you are experiencing no sound from your Sony Receiver, ensure all connecting cords are securely inserted into the input/output jacks of the receiver, speakers, and equipment. Also, verify that both the receiver and all connected equipment are turned on. Check that the MASTER VOLUME control is not set to 'VOL MIN' and that the SPEAKERS are set to 'ON'. Ensure headphones are not connected, and the muting function is off. Try selecting the desired input equipment. If you want to listen to the sound from the TV speaker, set the 'Audio Out' to 'TV+AMP' in the HDMI Settings menu. Sound may be interrupted when the sampling frequency, the number of channels or audio format of audio output signals from the playback equipment is switched, so adjust the audio settings to stabilize the output.
How to fix unbalanced or reversed left and right sounds on Sony STR-DN1030 Receiver?
To correct unbalanced or reversed left and right sounds, ensure correct and secure connections of the speakers and equipment. Additionally, adjust the sound level parameters using the Speaker Settings menu.
How to fix Sony STR-DN1030 Receiver when Dolby Digital or DTS multi channel sound is not reproduced?
If Dolby Digital or DTS multi channel sound is not being reproduced, verify the format of the content being played. When connecting the DVD player, etc., to the digital input jacks of this receiver, make sure the digital audio output setting of the connected equipment is available. Ensure 'Audio Out' is set to 'AMP' in the HDMI Settings menu. Note that you can enjoy High Bitrate Audio (DTSHD Master Audio, Dolby TrueHD), Multi Channel Linear PCM only with an HDMI connection.
What to do if my Sony Receiver's ON/STANDBY indicator flashes quickly?
If the ON/STANDBY indicator on your Sony Receiver is flashing in quick succession, it indicates a software update error. Unplug the power cord, and then plug it back in to allow the receiver to attempt the software update again. If the indicator continues to flash rapidly, contact your nearest Sony dealer.
Why is there severe hum or noise coming from my Sony STR-DN1030?
If you're experiencing severe hum or noise, make sure that the speakers and equipment are securely connected. Ensure connecting cords are away from transformers, motors, TVs, or fluorescent lights. Move your audio equipment away from the TV. Clean the plugs and jacks with a cloth slightly moistened with alcohol.
How to change the ring volume of the iPhone connected to Sony STR-DN1030 Receiver?
To change the ring volume of the iPhone, adjust the ring volume using the controls on the iPhone.
What to do if my Sony STR-DN1030 Receiver does not recognize the USB device?
If the USB device is not recognized, reboot the receiver and reconnect the USB device. Ensure a compatible USB device is connected. Refer to the USB device manual.
What to do if there is no sound from my iPod/iPhone connected to Sony Receiver?
If there is no sound from the iPod/iPhone, disconnect the iPod/iPhone and connect the iPod/iPhone again.
Why does my Sony STR-DN1030 have no image output in standby mode?
When the receiver enters into standby mode, image is from the last HDMI equipment selection before you turned off the receiver. If you are enjoying other equipment, play the equipment and perform the One-Touch Play operation, or turn on the receiver to select the HDMI equipment you want to enjoy. If you connect equipment not compatible with the “BRAVIA” Sync to the receiver, set “Pass Through” to “ON” in the HDMI Settings menu.
General| Display | - |
|---|---|
| Product color | Black |
| Audio decoders | Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS, DTS 96/24, DTS-ES, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1) |
| x.v.Color support | Yes |
| Apple docking compatibility | Not supported |
| HDMI in | 5 |
| Ethernet LAN (RJ-45) ports | 1 |
| Component video (YPbPr/YCbCr) in | 2 |
| RMS rated power | 1015 W |
| Audio output channels | 7.2 channels |
| Total Harmonic Distortion (THD) | 0.01 % |
| Power output per channel (1KHz@8 Ohm) | 120 W |
| Power output per channel (20-20KHz@8 Ohm) | 145 W |
| Connectivity technology | Wired & Wireless |
| Supported radio bands | AM, FM |
| Preset stations quantity | 60 |
| Optical drive included | No |
| Power consumption (standby) | 0.3 W |
| Package weight | 11000 g |
Weight and Dimensions| Depth | 322.6 mm |
|---|---|
| Width | 430 mm |
| Height | 158 mm |
Overview of the front panel controls and indicators.
Steps for installing and connecting speakers.
Instructions for connecting TV and video devices.
Steps for connecting audio devices.
Initial setup procedures for the receiver.
How to select speaker patterns and perform auto calibration.
Guide to connecting devices via HDMI.
Steps for connecting SACD or CD players.
How to set the voltage selector for local power.
Instructions for connecting the AC power cord.
Procedure for initial receiver setup and factory reset.
How to select the appropriate speaker pattern.
How to configure surround back speaker usage.
Guide to setting up a wireless network connection.
How to navigate and use the receiver's on-screen menu.
How to select and play content from connected equipment.
How to listen to FM and AM radio broadcasts.
How to select and adjust sound fields.
Overview of network features like DLNA, SEN, AirPlay.
Steps to set up Windows Media Player 12 as a server.
How to refresh the server list to find new servers.
How to remove a server from the list.
How to find the receiver's registration code for music services.
Details on the receiver's Bluetooth capabilities and profiles.
Explanation of the BRAVIA Sync function.
Setup for BRAVIA Sync when TV supports Easy Setting.
How to select audio input mode.
How to reassign video and audio input jacks.
How to operate the receiver in zone 2.
How to navigate and use the Settings menu.
How to program the remote for other equipment.
To Next Page
