Sony STR-DN1030 - System Settings menu; Auto Standby; Operating without connecting to a TV

102
US
D:\NORM'S JOB\SONY HA\SO120021\STR-DN1030_PMRF
03\4420297131_US\US05ENJ_STR-DN1030-CEL.fm
masterpage: Left
STR-DN1030
4-420-297-13(1)
x Address Info
Lets you check the Bluetooth device address
information. You can check the address
information when a Bluetooth device is
connected.
System Settings menu
You can adjust the settings of the receiver.
x Auto Standby
Lets you set the receiver switch to standby
mode automatically when you do not operate
the receiver or when there is no signals input to
the receiver.
• ON: Switches to standby mode after
approximately 30 minutes.
• OFF: Does not switch to standby mode.
Notes
• This function does not work in the following cases.
– “FM TUNER”, “AM TUNER”, “HOME
NETWORK”, “AirPlay” or “SEN” input is
selected.
– PARTY STREAMING function is being used.
– The software of the receiver is being updated.
• If you use the Auto standby mode and the Sleep
Timer at the same time, the Sleep Timer has
priority.
Operating without
connecting to a TV
You can operate this receiver using the display
panel even if the TV is not connected to the
receiver.
V/v/B/b,
GUI MODE
MENU
RETURN/
EXIT O
AMP
DISPLAY