Sony STR-DN1020 - Using the menu in the display panel

103
GB
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STR-
DN1020-CEL.fm
masterpage: Right
STR-DN1020
4-273-051-14(1)
Adjusting Settings
Press GUI MODE repeatedly to
select “GUI OFF”.
The receiver is switched to front panel display
mode.
1 Press AMP.
2 Press MENU.
3 Press V/v repeatedly to select
the menu you want, then press
or b.
4 Press V/v repeatedly to select
the parameter you want to
adjust, then press or b.
5 Press V/v repeatedly to select
the setting you want, then
press .
To return to the previous
display
Press B or RETURN/EXIT O.
To exit the menu
Press MENU.
Note
Some parameters and settings may appear dimmed
on the display panel. This means that they are either
unavailable or fixed and unchangeable.
Using the menu in the display
panel