Need help?Do you have a question about the Sony TA-A1ES and is the answer not in the manual?
General| Impedance | 4 Ω |
|---|---|
| Product color | Silver |
| Connectivity technology | Wired |
| Amplifier class | - |
| Frequency range | 10 - 100000 Hz |
| RMS rated power | 160 W |
| Audio output channels | - channels |
| Peak power per channel | - W |
| Signal-to-Noise Ratio (SNR) | 96 dB |
| Audio (L/R) in | 5 |
| Headphone outputs | 1 |
Weight and Dimensions| Depth | 365 mm |
|---|---|
| Width | 430 mm |
| Height | 107.5 mm |
| Weight | 18000 g |
Describes the amplifier's push-pull output stage for dynamic sound.
Explains the stable FBB chassis for high accuracy and reduced distortion.
Highlights the use of discrete circuits for optimal signal switching and sound quality.
Details speaker terminals designed for secure connection and minimal signal deterioration.
Features a dedicated amplifier for headphones with adjustable impedance.
Identifies and explains the controls and indicators on the front panel.
Details the connection terminals and switches located on the rear panel.
Shows the buttons on the remote control and their functions.
Step-by-step guide on connecting left and right speakers to the amplifier.
Instructions on how to adjust the impedance switch for connected speakers.
How to connect external audio sources using analog or XLR cables.
Guide for securely connecting the amplifier to a power outlet.
Procedures for powering the amplifier on and off using the unit or remote.
Instructions for correctly installing batteries into the remote control.
Steps to select an input source and play audio from connected equipment.
How to use the muting function and protect speakers from damage.
Guide to adjusting the impedance dial for optimal headphone listening.
Explanation of the auto standby feature and how to enable or disable it.
Important safety, placement, and cleaning guidelines for the amplifier.
Solutions for common problems like no power or auto-standby activation.
Troubleshooting steps for sound problems, hum, noise, or unbalanced audio.
Resolving remote control malfunctions and resetting the amplifier to default settings.
Details power output, impedance, distortion, and frequency response for the main unit.
Covers input sensitivity, impedance, S/N ratios, and headphone amplifier support.
Information on power requirements, dimensions, mass, and supplied accessories.
To Next Page
