Need help?Do you have a question about the Sony TA-A400 and is the answer not in the manual?
General| Type | Stereo Integrated Amplifier |
|---|---|
| Frequency Response | 10Hz to 100kHz |
| Total Harmonic Distortion | 0.03% |
| Damping Factor | 100 |
| Input Sensitivity | 2.5mV (MM) |
| Signal-to-Noise Ratio | 86 dB (MM) |
| Output | Headphones |
| Speaker Load Impedance | 4Ω to 16Ω |
| Impedance | Line: 100 k ohms |
| Dimensions | 430 x 129 x 342 mm |
| Signal to Noise Ratio | 105 dB (Line) |
Procedure for adjusting bias current for optimal performance.
Diagram showing component placement on circuit boards.
Detailed electronic circuit diagram illustrating component interconnections.
Diagrams illustrating the assembly of mechanical and electronic parts.
Comprehensive list of all mechanical and electronic parts for the unit.
Diagnosing and resolving issues related to no sound output.
Troubleshooting uneven or absent audio in one channel.
Identifying causes for sudden loss of audio from both speakers.
Addressing issues with bass response or sound imaging.
Resolving problems where tone controls are unresponsive.
Troubleshooting issues with recording program sources.
Identifying and eliminating unwanted hum or noise in the audio.
To Next Page
