Need help?Do you have a question about the Sony TA-FA777ES and is the answer not in the manual?
Covers power amp type, preamp, power section, rated output, and impedance.
Step-by-step instructions for disassembling the front panel, top, and bottom boards.
Guide for removing the sub chassis and function switch board.
Detailed steps for adjusting bias on the L-CH and R-CH boards.
Printed wiring board layout for input and main-B (L/R) circuit boards.
Electrical schematic diagrams for input and main-B (L/R) circuit boards.
Wiring board layout for balance, function, SP TM, HP, tone, and PRO.LED boards.
Covers power amp type, preamp, power section, rated output, and impedance.
Step-by-step instructions for disassembling the front panel, top, and bottom boards.
Guide for removing the sub chassis and function switch board.
Detailed steps for adjusting bias on the L-CH and R-CH boards.
Printed wiring board layout for input and main-B (L/R) circuit boards.
Electrical schematic diagrams for input and main-B (L/R) circuit boards.
Wiring board layout for balance, function, SP TM, HP, tone, and PRO.LED boards.
General| Type | Integrated Amplifier |
|---|---|
| Signal-to-Noise Ratio (MC) | 75dB |
| Input Sensitivity (line) | 150mV |
| Input Sensitivity (MM) | 2.5 mV |
| Damping Factor | 100 |
| Power Output | 100 W + 100 W (8 ohms) |
| Total Harmonic Distortion (THD) | 0.008% |
| Speaker Load Impedance | 4Ω - 16Ω |
| Dimensions | 430 x 160 x 460mm |
To Next Page
