Sony TA-VE910 - Page 32

32
EN
Additional Information
Remote
Button
Operates Function Remote
Button
Operates Function
0-9, >10 Tuner Selects preset numbers.
CH/PRESET
+/–
CD player/MD
deck/LD player
Selects track numbers.
0 selects track 10.
TV/VCR Selects channel numbers.
Tuner Scans and selects preset
stations.
Selects preset channels.TV/VCR
D.TUNING Tuner Selects the direct tuning
mode.
Skips discs (CD player with
multi-disc changer only).
CD playerD. SKIP
0/) CD player Searches tracks (forward or
backward).
Fast forwards or rewinds.Tape deck/MD
deck/VCR/LD
player
RMS
DIRECTION
Tape deck Selects tape direction (tape
decks with the RMS
*
function only).
RMS CLEAR Tape deck Clears RMS
*
program (tape
decks with the RMS
function only).
RMS
DIRECTION
9/(
Tape deck Programs tracks (tape deck
with the RMS
*
function
only).
Changes channels/discs
when used with 0-9.
TV/VCR/DBS
tuner/CD
player
ENTER
Turns on or off the power.TV/VCR/DBS
tuner/LD
player
VISUAL
POWER
Selects the channel entry
mode, either one or two
digit (in Europe only).
TV-/- -
Selects preset channels for
the small picture.
**
TVSUB CH +/–
Changes the position of the
small picture.
**
TVPOSITION
Swaps the small and the
large picture.
**
TVSWAP
Activates the picture-in-
picture function.
**
TVP IN P
Jumps back and forth
between the previous and
current channels.
TVJUMP
Selects output signal from
the antenna terminal: TV
signal or VCR program.
VCRANT TV/VTR
Normally, adjusts the
master volume of the
amplifier.
If TV CONTROL ON was
pressed, it adjusts the
volume on the TV.
TVMASTER VOL
+/–
Normally, mutes the sound
from the amplifier.
If TV CONTROL ON was
pressed, the sound on the
TV itself is muted.
TVMUTING
Not applicable.—SLOPE
*
RMS: Random Music Sensor
**
Only for Sony TVs with the picture-in-picture function
Selects discs (CD player
with multi-disc changer
only).
CD player/
MD deck/LD
player
Skips tracks.=/+
CD player/
Tape deck/MD
deck/LD
player/VCR
Pauses play or record. (Also
starts recording with
components in record
standby.)
P
( CD player/
Tape deck/MD
deck/LD
player/VCR
Starts play.
CD player/
Tape deck/MD
deck/LD
player/VCR
p Stops play.
9 Tape deck Starts play on the reverse
side.
r Tape deck Sets tape decks to the record
standby mode.
r + ( Tape deck/MD
deck/VCR
Starts recording when
pressed with ( (or 9 on
tape deck).
CD playerDISC
SHIFT Tuner Selects the memory bank.
5.1 INPUT — Not applicable.