Sony TRINITRON BVM-D9H5U - Page 61

3-13
BVM-D9H1U/D9H5U/D9H1E/D9H5E/D9H1A/D9H5A
3.6 White Balance Adjustment (5)
1. Turn off the main POWER switch.
2. Insert the BKM-120D into the SLOT 2.
3. Connect the D1-SDI 20 IRE WINDOW signal to the
BKM-120D.
4. Turn on the main POWER switch.
5. Select D1-SDI using the FORMAT menu of the
INPUT CONFIG menu.
6. Select MAINTENANCE menu of the SYSTEM
CONFIG menu.
7. Select the VIDEO menu.
8. Increase the CHROMA control to its maximum.
9. Adjust white balance by adjusting the PR/R BLACK
and PB/B BLACK menus of the VIDEO menu.
x = 0.283
y = 0.297
3.7 White Balance Adjustment (6)
1. Turn off the main POWER switch.
2. Insert the BKM-127W into the SLOT 2.
3. Connect the NTSC 20 IRE WINDOW signal to the
BKM-127W.
4. Turn on the main POWER switch.
5. Select NTSC, PAL using the FORMAT menu of the
INPUT CONFIG menu.
6. Select MAINTENANCE menu of the SYSTEM
CONFIG menu.
7. Select the VIDEO menu.
8. Increase the CHROMA control to its maximum.
9. Adjust white balance by adjusting the PR/R BLACK
and PB/B BLACK menus of the VIDEO menu.
x = 0.283
y = 0.297