Sony Trinitron PVM-1454QM - Rear Panel Connectors

Location and function of parts and controls
Front panel
[I] POWER switch and indicator
Depress to turn the monitor on. The indicator will light
up in green.
(g] VOLUME control
Turn this control clockwise or counterclockwise to
obtain the desired volume.
m) CONTRAST control
Turn clockwise to make the contrast higher and
counterclockwise to make it lower.
@] PHASE control
This control is effective only for the NTSC and NTSC4.43
color systems. Turn clockwise to make the skin tones
greenish and counterclockwise to make them purplish.
(ID CHROMA control
Turn clockwise to make the color intensity higher and
counterclockwise to make it lower.
[ID BRIGHT (brightness) control
Turn clockwise for more brightness and
counterclockwise for less.
[I] APERTURE control
Turn clockwise for more sharpness and
counterclockwise for less.
l~Mtl
The APERTURE, CHROMA, PHASE control settings have
no effect on the pictures of RGB signals.
2
BRIGHT CHROMA PHASE CONTRAST VOLUME
1
[ID MENU (EXIT) button
Press to make the menu appear. Press to return to the
previous screen in the menu.
[ID ENTER (SELECT) button
Press to decide a selected item in the menu.
[IQl t ( + )/ .J (-) buttons
Press to move the cursor (Iii-) or adjust selected value in
the menu.
[DJ BLUE ONLY selector
RESET button
Press (light on) to turn off the red and green signals. A
blue signal is displayed as an apparent monochrome
picture on the screen. This facilitates "chroma" and
"phase*" control adjustments and observation of VCR
noise.
* "Phase" control adjustment is effective only for the
NTSC signals.
Press to reset the setting in the menu.
[gj DEGAUSS button
Press this button momentarily. The screen will be
demagnetized. Wait for 10 minutes or more before
activating this button again.
~ ,nput select buttons
Press (light on) to select the program to be monitored.
A: for a signal fed through the LINE A connectors.
-6-
B: for a signal fed through the LINE B connectors.
C: for a signal fed through the LINE C connectors.
RGB: for a signal fed through the RGB connectors.