Rear panel
1
2
LINE A
LINE B
'v p.
CIN
VIDEO
VIDEO
~
D .fl
IN
OUT
IN OUT
e:
~
~
~~
AUDIO
AUDIO
IN OUT
IN OUT
@) ©) ©)
@)
ll@LI,
IN
IN
I~
~
R G
[I] AC IN socket
Connect the supplied AC power cord to this socket and
to a wall outlet.
[g) LINE A, LINE B connectors
Two groups (A and B) of line input connectors for the
composite video and audio signals and their loop-
through output connectors.
To monitor the input signal fed through these
connectors, press the A or B button (light on) on the
front panel.
VIDEO IN (BNC)
Connect to the video output of video equipment, such as
a VCR or a color video camera. For a loop-through
connection, connect to the video output of another
monitor.
VIDEO OUT (BNC)
Loop-through output of the VIDEO IN connector.
Connect to the video input for a VCR or another
monitor.
When the cable is connected to this connector, the
75-ohms termination of the input is automatically
released, and the signal input to the VIDEO IN
connector is output from this connector.
AUDIO IN (phono jack)
Connect to the audio output of a VCR or to a
microphone via a suitable microphone amplifier. For a
loop-through connection, connect to the audio output of
another monitor.
AUDIO OUT (phono jack)
Loop-through output of the AUDIO IN jack. Connect to
the audio input of a VCR or another monitor.
RGB
3
LINE C
YIC
IN OUT
@<@>
.- .- r ,..
,... ,...
AUDIO
IN OUT
©) @
IN
IN IN
~
©>
~I
B AUDIO SYNC
4
(The 'V\r mark indicates autom;it1c termination.)
~
LINE C connectors
VIC IN (4pin mini DIN)
Connect to the Y JC separate output of a video camera,
VCR or other video equipment.
VIC OUT (4pin mini DIN)
Loop-through output of the Y JC IN connector. Connect
to the Y JC separate input of ii VCR or another monitor.
When the cable is connected to this connector the
75-ohms termination of the input is ilUtomatirnlly
released, and the signal input to the Y JC IN connector is
output from this connector.
AUDIO IN (phono jack)
Connect to the audio output of ct VCR or a microphone
(through ii-suitable microphone mnplifier).
AUDIO OUT (phono jack)
Loop-through output of the AUDIO IN connector.
Connect to the audio input of a VCR or another monitor.
@] RGB IN connectors
Connect to the analog RGB outputs of a video camera.
To monitor the input signal fed through these
connectors, press RGB button (light on) nn the front
panel.
R IN, G IN, B IN (BNC)
When you set RGB SYNC to SYNC ONG in the menu,
the monitor operates on the sync signal from the G
channel.
AUDIO IN (phono jack)
Connect to the audio output of video equipment when
the anil!og RGB signal is input.
SYNC IN (BNC)
To use the sync signal fed through this connector, set
RGB SYNC to EXT SYNC in the menu.
3
-7-
To Next Page
Loading...
