Sony Trinitron PVM-14L3 - Specifications

23 (GB)
Specifications
General
System
Frame
System
Total lines Active lines
rate
Scanning Aspect
Standard
per frame per frame
(Hz)
format ratio
575/50I (PAL) 625 575 25 2:1 Interlace 16:9/4:3 ITU 601
480/60I (NTSC) 525 483 30 2:1 Interlace 16:9/4:3 ITU 601
PVM-14L4
CRT: HR Trinitron, EBU standard
luminescent material
Power: AC100 to 240V, 50/60Hz
Power consumption:
Maximum 100W, 1.0 to 0.5A
(when the optional BKM-150CP
has been installed)
Standard: 88W, 0.9 to 0.4A
(without optional board)
Peak inruch current
(1) Power ON, current probe
method: 53 A (240 V)
(2) Hot switching inrush current,
measured in accordance with
European standard EN55103-1:
35 A (230 V)
Dimensions (max.):
Approx. 346 × 280 × 424mm
(w/h/d)
Mass: Approx. 17kg
PVM-20L4
CRT: HR Trinitron, EBU standard
luminescent material
Power: AC100 to 240V, 50/60Hz
Power consumption:
Maximum 123W, 1.3 to 0.6A
(when the optional BKM-150CP
has been installed)
Standard: 110W, 1.1 to 0.5A
(without optional board)
Peak inruch current
(1) Power ON, current probe
method: 53 A (240 V)
(2) Hot switching inrush current,
measured in accordance with
European standard EN55103-1:
35 A (230 V)
Dimensions (max.):
Approx. 452 × 414 × 500mm
(w/h/d)
Mass: Approx. 31kg
PVM-14L3
CRT: Trinitron, P-22 standard
luminescent material
Power: AC100 to 240V, 50/60Hz
Power consumption:
Maximum 100W, 1.0 to 0.5A
(when the optional BKM-150CP
has been installed)
Standard 88W, 0.9 to 0.4A (without
optional board)
Peak inruch current
(1) Power ON, current probe
method: 53 A (240 V)
(2) Hot switching inrush current,
measured in accordance with
European standard EN55103-1:
35 A (230 V)
Dimensions (max.):
Approx. 346 × 280 × 424mm
(w/h/d)
Mass: Approx. 16.5kg
Input/output connectors
Input
LINE A input connector
Y/C input 4-pin mini-DIN (1)
See the pin assignment
VIDEO input
BNC type (1) 1Vp-p ± 6dB
negative synchronization