– 2 –
TABLE OF CONTENTS
Specifications ........................................................................... 1
1. SERVICING NOTE.......................................................... 3
2. GENERAL
Location and Function of Controls .................................... 4
3. DISASSEMBLY
3-1. Front Panel Removal .................................................. 5
3-2. CD Mechanism Removal ........................................... 5
3-3. Mechanism Deck Removal......................................... 6
4. ADJUSTMENTS
4-1. Mechanical Adjustments ............................................ 7
4-2. Electrical Adjustments ................................................ 7
5. EXPLANATION OF IC TERMINALS ..........................11
6. DIAGRAMS
6-1. Printed Wiring Boards – BD Section –..................... 14
6-2. Schematic Diagram – BD Section – ......................... 17
6-3. Schematic Diagram – Main Section – ...................... 22
6-4. Printed Wiring Boards – Main Section – .................. 27
7. EXPLODED VIEWS
7-1. Chassis Section ......................................................... 30
7-2. Panel Section ............................................................ 31
7-3. Mechanism Section -1 .............................................. 32
7-4. Mechanism Section -2 .............................................. 33
7-5. CD Mechanism Section -1........................................ 34
7-6. CD Mechanism Section -2........................................ 35
8. ELECTRICAL PARTS LIST ........................................ 36
Laser component in this product is capable of emitting radiation
exceeding the limit for Class 1.
This appliance is classified as a
CLASS 1 LASER product.
The CLASS 1 LASER
PRODUCT MARKING is lo-
cated on the rear exterior.
CAUTION
Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation ex-
posure.
This caution label
is located inside
the unit.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK ! OR DOTTED LINE
WITH MARK ! ON THE SCHEMATIC DIAGRAMS AND IN THE
PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE
PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN
SUPPLEMENTS PUBLISHED BY SONY.
To Next Page
Loading...
