4
Projecting
Projecting
When you connect the projector, make sure to:
• Turn off all equipment before making any connections.
• Use the proper cables for each connection.
• Insert the cable plugs firmly. When pulling out a cable, be sure to pull it out from the plug,
not the cable itself.
Refer also to the instruction manual of the equipment to be connected.
Before making connections
Open the cover to use the AUDIO/VIDEO connector.
Connecting with a computer
Connecting the Projector
INPUT
TILT
ZOOM– +
FOCUS– +
FOCUS
AUTO
ENTER
PUSH
MENU
INPUT A
AC IN
VIDEO
AUDI O
POWER
SAVING
TEMP/
FAN
LAMP/
COVER
Push.
INPUT
TILT
ZOOM– +
FOCUS– +
FOCUS
AUTO
ENTER
PUSH
MENU
INPUT A
AC IN
VIDEO
AUDI O
POWER
SAVING
TEMP/
FAN
LAMP/
COVER
video input
HD D-sub 15-pin cable (supplied)
A/V connecting
adaptor (supplied)
Audio (stereo audio
connecting cable (not
supplied))*
Use a no-resistance cable.
* Connect only when you want to output the audio from the speaker of the
projector.
To Next Page
Loading...
Need help?
General
