EasyManuals Logo

Sony VPL-CWZ10 User Manual

Sony VPL-CWZ10
184 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #151 background imageLoading...
Page #151 background image
Help Guide
Data Projector
VPL-CWZ10/CXZ10
Reading the Indicator
You can check the projector status or abnormality by checking the lighting/flashing status of the ON/STANDBY indicator
and WARNING indicator.
If the indicators flash in red, follow the instructions under “Warning Indication and Remedies” to resolve the issue.
Top of the main unit
Status Indication
WARNING: Off, ON/STANDBY: Lights in red
Standby mode
The power is supplied to the projector and the projector is in a standby mode according to the setting.
WARNING: Off, ON/STANDBY: Flashes in green
Warm-up state
The projector is warming up after it is turned on.
WARNING: Off, ON/STANDBY: Lights in green
Power on state
The projector is ready for projection.
WARNING: Off, ON/STANDBY: Lights in orange
151

Other manuals for Sony VPL-CWZ10

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sony VPL-CWZ10 and is the answer not in the manual?

Sony VPL-CWZ10 Specifications

General IconGeneral
Matrix size0.64 \
Heat dissipation1167 BTU/h
Native aspect ratio16:10
Projection distance- m
Vertical scan range48 - 92 Hz
Horizontal scan range15 - 92 kHz
Projection technology3LCD
Contrast ratio (typical)-
Screen size compatibility40 - 300 \
Projector native resolutionWXGA (1280x800)
Keystone correction, horizontal-30 - 30 °
FocusManual
Throw ratio1.29:1 - 2.07:1
Zoom capabilityYes
Focal length range- mm
Light source typeLaser
Service life of light source1000 h
RMS rated power16 W
Supported video modes480p, 576i, 720p, 1080i, 1080p
Analog signal format systemNTSC, NTSC 3.58, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
DVI portNo
Composite video in0
HDMI connector typeFull-size
Serial interface typeRS-232C
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Noise level36 dB
Noise level (economic mode)28 dB
Ethernet LAN data rates10, 100 Mbit/s
Quantity per pack1 pc(s)
Harmonized System (HS) code85286200
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)20 - 80 %
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (max)342 W
Power consumption (standby)0.5 W
PlacementDesktop
Product typeStandard throw projector
Product colorBlack, White
Weight and Dimensions IconWeight and Dimensions
Depth319.3 mm
Width371 mm
Height100 mm
Weight5700 g

Related product manuals