To Next PageTo Next Page
Need help?Do you have a question about the Sony VPL-CWZ10 and is the answer not in the manual?
General| Matrix size | 0.64 \ |
|---|---|
| Heat dissipation | 1167 BTU/h |
| Native aspect ratio | 16:10 |
| Projection distance | - m |
| Vertical scan range | 48 - 92 Hz |
| Horizontal scan range | 15 - 92 kHz |
| Projection technology | 3LCD |
| Contrast ratio (typical) | - |
| Screen size compatibility | 40 - 300 \ |
| Projector native resolution | WXGA (1280x800) |
| Keystone correction, horizontal | -30 - 30 ° |
| Focus | Manual |
| Throw ratio | 1.29:1 - 2.07:1 |
| Zoom capability | Yes |
| Focal length range | - mm |
| Light source type | Laser |
| Service life of light source | 1000 h |
| RMS rated power | 16 W |
| Supported video modes | 480p, 576i, 720p, 1080i, 1080p |
| Analog signal format system | NTSC, NTSC 3.58, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM |
| DVI port | No |
| Composite video in | 0 |
| HDMI connector type | Full-size |
| Serial interface type | RS-232C |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Noise level | 36 dB |
| Noise level (economic mode) | 28 dB |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Quantity per pack | 1 pc(s) |
| Harmonized System (HS) code | 85286200 |
| Storage temperature (T-T) | -10 - 60 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 342 W |
| Power consumption (standby) | 0.5 W |
| Placement | Desktop |
| Product type | Standard throw projector |
| Product color | Black, White |
Weight and Dimensions| Depth | 319.3 mm |
|---|---|
| Width | 371 mm |
| Height | 100 mm |
| Weight | 5700 g |
Confirms inclusion of projector components like remote, battery, cables, and accessories.
Step-by-step guide on how to insert or replace the battery in the remote commander.
Instructions for attaching the air filter to the projector for floor or ceiling installation.
Identifies and labels the various parts and controls on the projector's main unit.
Details and labels all input/output terminals on the projector for various connections.
Explains the buttons and functions of the remote commander and the projector's control panel.
Guide for connecting the projector to a computer via RGB or HDMI output terminals.
How to connect the projector to external video and audio devices.
Steps to connect the projector to a network via a hub or router.
Instructions for powering the projector on and off using the main unit or remote.
Steps to display images, including selecting input source and adjusting focus/size.
How to adjust focus, size, position, and aspect ratio of the projected image.
Procedures to correct trapezoidal distortion and screen distortion.
General guide on how to navigate the projector's menu screens and adjust settings.
How to adjust settings like Picture Mode, Brightness, Contrast, Color, Hue, Sharpness.
Configuring network IP, communication mode, ECO, and standby settings.
Procedures for software updates, security lock, and password management.
Guidelines for proper installation, cleaning, and environmental considerations.
Important safety information regarding medical devices and network security.
Guide to diagnosing and resolving common problems like no power, no image, or no sound.
How to interpret indicator lights and on-screen messages for status and errors.
Details on display device, projection lens, light source, and electrical system.
Information on projector terminals, supported signals, and pin assignments.
Data on power requirements, consumption, operating temperatures, and physical dimensions.
