EasyManuals Logo

Sony VPL-CWZ10 User Manual

Sony VPL-CWZ10
184 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
Help Guide
Data Projector
VPL-CWZ10/CXZ10
Attaching the Air Filter (For the Customers in India only)
The supplied accessories required vary depending on the installation method.
For installing to the floor
For installing to the ceiling
Attach the dust cover assembly to the unit by pushing the two levers on it. (The product is pre-fitted with a dust cover
assembly when shipped.)
Remove the air filter (B) from the dust cover assembly (A), and then attach the air filter to the air filter cover
(C).
Pull the pull stick (D) upwards when removing the air filter from the dust cover assembly.
When attaching the air filter to the air filter cover, make sure the correct side is being attached so that the pull stick
is protruding from the air filter.
1
Attach the air filter cover to the unit by pushing the two levers on it.
2
10

Other manuals for Sony VPL-CWZ10

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sony VPL-CWZ10 and is the answer not in the manual?

Sony VPL-CWZ10 Specifications

General IconGeneral
Matrix size0.64 \
Heat dissipation1167 BTU/h
Native aspect ratio16:10
Projection distance- m
Vertical scan range48 - 92 Hz
Horizontal scan range15 - 92 kHz
Projection technology3LCD
Contrast ratio (typical)-
Screen size compatibility40 - 300 \
Projector native resolutionWXGA (1280x800)
Keystone correction, horizontal-30 - 30 °
FocusManual
Throw ratio1.29:1 - 2.07:1
Zoom capabilityYes
Focal length range- mm
Light source typeLaser
Service life of light source1000 h
RMS rated power16 W
Supported video modes480p, 576i, 720p, 1080i, 1080p
Analog signal format systemNTSC, NTSC 3.58, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
DVI portNo
Composite video in0
HDMI connector typeFull-size
Serial interface typeRS-232C
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Noise level36 dB
Noise level (economic mode)28 dB
Ethernet LAN data rates10, 100 Mbit/s
Quantity per pack1 pc(s)
Harmonized System (HS) code85286200
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)20 - 80 %
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (max)342 W
Power consumption (standby)0.5 W
PlacementDesktop
Product typeStandard throw projector
Product colorBlack, White
Weight and Dimensions IconWeight and Dimensions
Depth319.3 mm
Width371 mm
Height100 mm
Weight5700 g

Related product manuals