To Next Page
D
destinyhendersonAug 29, 2025
Why is the picture too dark on my Sony VPL-HW55ES Projector?
- DDr. Christina HartmanAug 29, 2025
If the picture on your Sony Projector is too dark, adjust the “Contrast” or “Brightness” in the Picture menu.
Why is the picture too dark on my Sony VPL-HW55ES Projector?
If the picture on your Sony Projector is too dark, adjust the “Contrast” or “Brightness” in the Picture menu.
How to make input terminals appear on Sony Projector?
Set “Auto Input Search” in the Function menu to “Off” to make input terminals appear on your Sony Projector.
What to do if my Sony VPL-HW55ES Projector has no picture?
If your Sony Projector displays no picture, ensure that all connections are properly made. Use the INPUT button to select the correct input source. If you are using a computer, set the computer signal to output from or only to an external monitor.
What does it mean when ON/STANDBY flashes red on Sony VPL-HW55ES Projector (4 flashes)?
If the ON/STANDBY indicator on your Sony Projector flashes red with a repetition rate of 4 flashes, it indicates a broken fan. Consult with qualified Sony personnel.
How to fix Sony Projector remote control not working?
If your Sony Projector's remote control isn't working, try replacing the batteries with new ones, ensuring they are inserted with the correct polarities. Also, make sure there is nothing obstructing the signal between the remote control and the projector's detector.
How to fix image retention on Sony Projector?
If an image is left on the screen of your Sony Projector (image retention), turn off the power for a while to eliminate the retained image.
Why is my Sony Projector showing 'Frequency is out of range!'?
The 'Frequency is out of range!' message on your Sony Projector indicates that the input signal is outside the projector's acceptable frequency range. Input a signal that falls within the projector's supported frequency range.
Why does my Sony Projector keep turning off suddenly?
Your Sony Projector might be turning off suddenly because the “Power Saving” setting in the Setup menu is set to “Standby.” You can resolve this by setting “Power Saving” to “Off.”
What to do if my Sony VPL-HW55ES power is not turned on?
If your Sony Projector doesn't turn on, it might be because you recently turned it off and are trying to turn it back on too quickly. Wait about 1 minute before trying again. Also, ensure the lamp cover and the filter holder are securely closed and tightened. Finally, check the warning indicators.
Why does the power suddenly turn off on my Sony VPL-HW55ES?
If your Sony Projector's power suddenly turns off, check that “Power Saving” in the Setup menu is set to “Standby.” If it is, set “Power Saving” to “Off.”
General| Display Technology | SXRD |
|---|---|
| Resolution | 1920 x 1080 |
| Brightness | 1700 ANSI lumens |
| Contrast Ratio | 120, 000:1 |
| Lamp Life | 6000 hours |
| Zoom Ratio | 1.6x |
| Lens Shift | Vertical: ±71%, Horizontal: ±25% |
| 3D | Yes |
| Projection Size | 40 to 300 inches |
| Dimensions | 407.4 x 179.2 x 463.9 mm |
| Inputs | 2 x HDMI, 1 x Component, 1 x Composite |
| Throw Ratio | 1.36 - 2.16:1 |
