Why is my Sony VPL-HW55ES Projector remote control not working?
If your Sony Projector's remote control isn't working, start by replacing the batteries with new ones, ensuring they are inserted with the correct polarities. Also, be aware that fluorescent lamps near the remote control detector can cause interference. Finally, if you're using an optional 3D Sync Transmitter, make sure it's not interfering with the remote control detector.
What causes picture ghosts on Sony VPL-HW55ES?
If the picture on your Sony Projector has ghosts, use 3D glasses to watch 3D video images, or set “2D-3D Display Sel.” to “2D.”
How to resolve faded text on Sony VPL-HW55ES when connected to a computer?
If texts appear faded when your Sony Projector is connected to a computer and inputting a computer signal, adjust “Sharpness” in the Picture menu, or set “HDMI Dynamic Range” to “Limited” in the Function menu. This issue may occur when a signal other than those of HDMI standard is input.
How to fix unclear bright areas on Sony Projector with HDMI input?
If the bright area of the picture on your Sony Projector becomes unclear, or texts become faded when an HDMI video signal is input, switch the RGB output level of the connected equipment, or switch the HDMI Dynamic Range of the unit.
General| Display Technology | SXRD |
|---|---|
| Resolution | 1920 x 1080 |
| Brightness | 1700 ANSI lumens |
| Contrast Ratio | 120, 000:1 |
| Lamp Life | 6000 hours |
| Zoom Ratio | 1.6x |
| Lens Shift | Vertical: ±71%, Horizontal: ±25% |
| 3D | Yes |
| Projection Size | 40 to 300 inches |
| Dimensions | 407.4 x 179.2 x 463.9 mm |
| Inputs | 2 x HDMI, 1 x Component, 1 x Composite |
| Throw Ratio | 1.36 - 2.16:1 |
To Next Page
