41
The Setup Menu
Adjustments and Settings Using a Menu
• If you turn on “High Altitude Mode” to “On” at an altitude less than 1,500 m (4,921 feet), the
projector may reduce the reliability of the lamp.
• When “High Altitude Mode” is set to “On”, the number of turns of the fan increases, and the
fan noise becomes slightly louder.
• For some languages selected on the “Language,” Network setting menu, the network window
and the USB window are displayed in English.
• When “Standby Mode” is set to “Low,” the network and network control function cannot be
operated while the unit is in standby mode. To use the network control function, set “Standby
Mode” to “Standard.”
• When the input signal is not displayed correctly even if “Input-A Signal Sel.” set to “Auto,”
select the item according to the input signal.
• Normally, set “Color System” to “Auto.” If the picture is distorted or colorless, select the
color system appropriate for the input signal.
Input-A Signal Sel. Selects the type of signal input from the equipment
connected to the INPUT A connector.
Selects the type of signal input from the equipment by
selecting “Input-A” with the INPUT key.
• Auto: Selects the input signal type automatically.
• Computer: Inputs the signal from a computer.
• Video GBR: Inputs the signal from a TV game or
HDTV broadcast.
• Component: Inputs the component signal from a
DVD player/recorder, Blu-ray Disc player, digital
tuner, etc.
Auto
Color System Selects the color system of the input signal.
• Auto: Selects the color system of the input signal
automatically from among NTSC
3.58, PAL, SECAM,
NTSC
4.43, PAL-M, PAL-N, or PAL60.
• “NTSC
3.58”–“PAL-N”: Allows you to set the color
system to the selected system manually.
Auto
Lamp Timer Reset When replacing the lamps, reset the lamp timer. –
Setting items Functions Initial setting
Notes
To Next Page
Loading...
