Need help?Do you have a question about the Sony VPL-VW760ES and is the answer not in the manual?
General| Matrix size | 0.74 \ |
|---|---|
| Native aspect ratio | - |
| Projection distance | - m |
| Vertical scan range | 48 - 92 Hz |
| Horizontal scan range | 19 - 72 kHz |
| Projection technology | SXRD |
| Screen size compatibility | 60 - 300 \ |
| Projector native resolution | DCI 4K (4096x2160) |
| Focus | Auto |
| Zoom capability | Yes |
| Focal length range | - mm |
| Vertical lens shift range | -80 - 85 % |
| Horizontal lens shift range | -31 - 31 % |
| Supported video modes | 480p, 576p, 720p, 1080p, 2160p |
| Supported graphics resolutions | 1920 x 1080 (HD 1080), 3840 x 2160, 4096 x 2160 |
| Noise level | 24 dB |
| On Screen Display (OSD) languages | ARA, CHI (SIMPL), CHI (TR), DEU, DUT, ENG, ESP, FRE, ITA, JPN, KOR, NOR, POL, POR, RUS, SWE, THA, TUR |
| DVI port | No |
| HDMI connector type | Full-size |
| Serial interface type | RS-232C |
| USB 2.0 ports quantity | 1 |
| VGA (D-Sub) ports quantity | 0 |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 5 - 35 °C |
| Storage relative humidity (H-H) | 10 - 90 % |
| Operating relative humidity (H-H) | 35 - 85 % |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.4 W |
| Power consumption (typical) | 430 W |
| Power consumption (network standby) | 1 W |
| Light source type | Laser |
| Service life of light source | - h |
| Placement | Desktop |
| Product type | Standard throw projector |
| Product color | Black |
| Market positioning | Home cinema |
Weight and Dimensions| Depth | 496 mm |
|---|---|
| Width | 560 mm |
| Height | 223 mm |
| Weight | 20000 g |
Crucial safety measures for handling laser light and unit components during servicing.
Identifies the physical placement of internal boards and fans within the unit.
Diagram showing the layout of various circuit boards inside the projector.
Diagram showing the placement of all cooling fans within the projector.
Specifies torque values for different screw types used during assembly/disassembly.
Provides instructions for dismantling the projector, starting with external parts.
General warnings and precautions before performing electrical adjustments.
Lists required equipment and initial setup steps before adjustments.
Specifies necessary tools and software for performing adjustments.
Procedure for accessing the projector's internal service menu.
Specific safety and procedural notes before undertaking repairs.
Steps for data writing and calibration after optical block replacement.
Detailed steps for calibrating white balance under various color temperature modes.
Procedure for adjusting white balance to D93 color temperature.
Procedure for adjusting white balance to D75 color temperature.
Table listing adjustable parameters and their memory names.
Instructions for updating the projector's firmware via USB.
Process for loading calibration data onto the unit.
Procedure to extract current adjustment data from the unit.
Steps to retrieve error logs for troubleshooting.
Important information regarding safety, standardization, and stock of spare parts.
Detailed diagrams showing the breakdown of major assemblies and their parts.
Exploded view of the projector's cover components and associated parts.
Exploded view of the power supply unit and its components.
Exploded view of the optical block assembly and its components.
High-level block diagram showing the main functional units and their interconnections.
Detailed wiring diagrams showing connections between boards and components.
To Next Page
