To Next PageTo Next PageWhy is there no sound through my Sony MiniDisc Player headphones?
If no sound is coming through your headphones/earphones when using your Sony MiniDisc Player, first ensure the headphone/earphone plug is firmly connected. If that doesn't work, adjust the volume by pressing VOL + or –. Also, check if the plug is dirty and needs cleaning.
What to do if my Sony Walkman MZ-N420D skips tracks?
If your Sony MiniDisc Player is skipping to several tracks ahead or behind when you press . or >, it's likely the GROUP button has been pressed. The player will return to normal if no operation has been made for 5 seconds.
Why my Sony Walkman MZ-N420D does not work?
If your Sony MiniDisc Player isn't working or is working poorly, first, disable HOLD by sliding the HOLD switch to the opposite direction of the arrow. Ensure the lid is firmly closed until it clicks. If moisture has condensed inside, take the MD out and leave the player in a warm place for several hours. Check the dry battery; replace it if it's weak or insert it correctly. Make sure a recorded MD is inserted, and if the disc is damaged, replace it. If the player received a mechanical shock, remove the dry battery, wait 30 seconds, and reinsert it.
What to do if my Sony MiniDisc Player works poorly?
If your Sony MiniDisc Player is not working or works poorly, ensure the volume is not set too low and turn it up. Also, make sure a disc is inserted into the player. If not, insert a recorded disc.
Why does my Sony MiniDisc Player skip during playback?
If your Sony MiniDisc Player is experiencing playback sound skips, ensure the player is placed on a stable surface, away from continuous vibration. Also, very short tracks may cause skipping, so avoid creating tracks under one second long.
Why does my Sony Walkman MZ-N420D MiniDisc Player have static?
If your Sony MiniDisc Player is producing sound with a lot of static, strong magnetism from a television or similar device may be interfering with its operation. Move the player away from the source of strong magnetism.
Why won't my Sony Walkman MZ-N420D MiniDisc Player play normally?
If your Sony MiniDisc Player is not playing an MD normally, check if repeat play is selected or if the playback mode has been changed. Use the MENU on the player to change back to the normal play.
Why does my Sony Walkman MZ-N420D MiniDisc Player not play from the first track?
If your Sony MiniDisc Player is not playing an MD from the first track, it could be because the disc playing stopped before it reached the last track. Press NX for 2 seconds or more to start playing. Alternatively, group play mode might be selected; use MENU on the player to change back to normal play, and then press NX for 2 seconds or more.
Why doesn't the digital sound preset function work on my Sony MiniDisc Player?
If the digital sound preset function on your Sony MiniDisc Player is not working, ensure that the digital sound preset is turned on. Select “SOUND1” or “SOUND2”.
Why does the group function not operate on my Sony Walkman MZ-N420D?
If the group function on your Sony MiniDisc Player does not operate, it may be because you're using a disc with no group setting. Use a disc with a group setting.
General| Type | MiniDisc Player |
|---|---|
| Recording Modes | SP, LP2, LP4 |
| Audio Formats Supported | ATRAC, ATRAC3 |
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | 90 dB |
| Display | LCD |
| PC Connectivity | USB |
| ATRAC Type-R DSP | Yes |
| Net MD | Yes |
| Power Source | AA Battery or AC Adapter |
| Headphone Output | 3.5 mm |
| Remote Control | Yes |
