16
Getting started
Charge the rechargeable battery before using. Even if the rechargeable
battery is not charged, you can use the recorder as long as the AC
power adaptor is connected.
1
Insert the rechargeable battery.
2
Charge the rechargeable battery.
1 Connect the AC power adaptor to the
battery charging stand and the AC
adaptor to a wall outlet.
2 Place the recorder on the battery
charging stand.
“Charging” flashes, e appears in the
display, and charging starts. When charging
is completed, the battery indication
disappears. Full charging of a completely
discharged rechargeable battery takes about
3.5 hours. The recorder can be used when
e disappears in the display. The battery
will be fully charged after charging is
continued 2 more hours.
e
E
Insert the NH-14WM
rechargeable battery minus
end first.
Close the lid.Slide OPEN to open the
battery compartment lid.
AC power
adaptor
To DC IN 3V
To a wall
outlet
Battery charging
stand
Attach the
connector to the
jack firmly.
To Next Page
Loading...
