42
Moving recorded tracks
(Move)
You can change the order of the recorded
tracks.
Note
To move tracks in a disc with group settings,
see page 51.
Example
Move track C (track number 3) from the
third to the second track.
1 While playing the track you want to
move, press the jog dial.
2 Turn the jog dial until “EDIT”
appears in the display, and then press
the jog dial.
The recorder plays the selected track
repeatedly.
3 Turn the jog dial until “Move”
appears in the display, and then press
the jog dial.
4 Turn the jog dial until “ : Move”
appears in the display, and then press
the jog dial.
The selected track number flashes in
the middle row of the display.
If the track has been labeled, press
> to make the track name appear
in the display. Press . to display
the track number again.
5 Turn the jog dial until the destination
track number flashes in the display.
For the example, since track C will be
moved to track “002”, turn the jog
dial until “002” flashes in the display.
6 Press the jog dial to enter the
selection.
The track moves to the selected
destination track.
To cancel moving
Press x for 2 seconds or more.
To return the preceding
settings
Press x.
For the remote control operation, see
page 66.
A CDB
A BDC
Before moving
After moving
Jog dial
5-way control
key (
., >)
To Next Page
Loading...
