What is the group
function?
The group function is provided 1oallow
playback of discs wilh group settings. The
group function is convenient lbr playback
of MDs on which several albums or CD
singles have been recorded in MDLP
(LP2/LP4) mode.
What is a disc with group
settings?
The recorder can operate various
functions in units of group; thai is tracks
thai have been recorded on a disc as part
of separate groups, as shown below.
Beforegroup settings are made
Disc
11121314151617181111121131141151
!!,
Track1 to 5 are assignedto group 1.
Track8 to12 are assignedto group2.
Track13 to15 are assignedto group 3.
Track6 to 7 are assignedto no group.
After setting the group (groupplay)
Disc ]
Group1 Group2 Group3
/1_'1 I_1 I" 1
H
Tracksthat were notassignedto a group
are treated as being part of "GP --".
You can create a maximum of 99 groups
on a disc.
Note
The recorder does ]lot support the recording of
group se_tings on the recorder. Use the supplied
SonicSlage software to assign tracks to group.
For details, see "Software Operation" section
(page 32).
MENU
,oGROUP
ENT/II="-II, I<_,
I_1, I/CANCEL
Playing a track in group play
In group play, all groups are played in
order, starting wilh group 1, followed by
lhe unassigned tracks ("GP --'). Playback
slops after all lhe tracks have been played.
1
2
3
4
Press MENU.
Press _ or _ repeatedly until
"P-MODE" appears in the display,
and then press ENr/ml,-||.
Press _ or _ repeatedly until
"U'I" and "Normal" appear in the
display, and then press EN'ITI_| |.
Press _ or _ repeatedly until
"RepOFF" appears in |he display, and
then press EN'F/D,'-II to entor lhe
selection.
To cue to the start of a group
(Group Skip)
1 While playing, press GROUP.
2 Press I_ or I_1.
Pressing the _ or _ button cues to the
first track of the previous or next group.
21
To Next Page
Loading...
