Sony Walkman NWZ-E443 - Changing the FM Radio Settings; Setting the reception [Scan Sensitivity]

ModelName: Canary_E
PartNumber: 4-154-408-11
76
76
Listening and Recording FM Radio
Changing the FM Radio Settings
To change the FM radio settings, select [Settings] from the [Home] menu,
then select [FM Radio Settings].
Setting the reception [Scan Sensitivity]
When you select stations using the [Auto Preset] function (

p
. 68) or the
/ button, the FM receiver may receive unwanted broadcast stations as a
result of sensitivity being too high. In this case, set the reception to [Low].
[High] is set by default.
 From the [Home] menu, select [Settings]

[FM Radio Settings]

[Scan Sensitivity]

[Low].

T
o set the reception sensitivity back to the default, select [High].
Setting monaural/stereo [Mono/Auto]
If noise occurs during FM reception, set the receiver to [Mono] for monaural.
If you set it to [Auto], monaural/stereo reception is selected automatically,
depending on reception conditions. [Auto] is set by default.
 From the [Home] menu, select [Settings]

[FM Radio Settings]

[Mono/Auto]

[Mono].

T
o return to the automatic setting, select [Auto].
BACK/HOME
button
[Settings]
5-way button
Table of
Contents
Home
Menu
Index