EasyManua.ls Logo

Sony WRT-807B - Introduction; Transmitting Channel Band; Features

Sony WRT-807B
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2(GB)
Introduction
The WRT-807B is a UHF-synthesized wireless microphone
for use in a 800-MHz band UHF-synthesized wireless
microphone system.
The WRT-807B operates in conjunction with the MB-806A
with WRU-806B UHF Synthesized Tuner Unit for vocal
concentration.
The WRT-807B can be also used with existing Sony
wireless microphone systems consisting of the WRT-805B/
855B UHF Synthesized Transmitter and WRR-805B/855B/
862B UHF Synthesized Tuner, etc.
Transmitting Channel Band
The microphone/transmitter and tuners of wireless
microphone systems are classified by frequency band.
A 24-MHz frequency band is assigned to each microphone/
transmitter and tuner model.
In building a UHF wireless microphone system, be sure to
pair a microphone/transmitter with a tuner that has the same
TV channel number.
Features
Phase Locked Loop (PLL) synthesized system
The WRT-807B features a refined phase locked loop (PLL)
synthesizer circuit.
POWER switch with holding function
The POWER switch can be locked in the ON position to
protect against accidental power cut-offs.
Low-battery notification on tuner
When the microphone battery is low, the microphone sends a
warning to the WRR-805B/862B/WRU-806B in the form of
“Battery status information.”
This information is sent to the WRR-805B/862B/WRU-
806B about one hour before the battery goes dead to allow
the battery to be safely replaced.
When the WRR-805B/862B/WRU-806B receives this
information, the LED on tuner panel starts to flash.
Powered by readily available battery type
The built-in, high-efficiency DC-DC converter provides
about 5 hours of continuous and stable operation with just a
single LR6 (size-AA) alkaline battery.

Other manuals for Sony WRT-807B

Related product manuals