Help Guide
In-Car Receiver
XAV-AX5500/XAV-AX5550D
Playing a USB Device
MSC (Mass Storage Class) type USB devices
*1
compliant with the USB standard can be used. MTP (Media Transfer
Protocol) type USB devices
*1
*2
can be used only when connected to the USB port 2.
Note
For details on the compatibility of your USB device, visit the support site.
Check the supported file formats for USB playback.
To remove the USB device
Turn the unit off or turn the ignition switch to the ACC off position, then remove the USB device.
Related Topic
Supported Formats for USB Playback
Customer Support Websites
5-010-463-11(2) Copyright 2020 Sony Corporation
e.g., a USB flash drive, digital media player, Android™ phone
*1
Some digital media players or Android phones may require setting to MTP mode.
*2
Turn down the volume on the unit.
1
Connect the USB device to the USB port 1 or the USB port 2.
2
Press HOME, then touch [USB port 1] or [USB port 2].
Playback starts.
3
To Next Page
Loading...
Need help?
General
