To Next PageTo Next Page
Need help?Do you have a question about the Sony XEC-1000 and is the answer not in the manual?
Explains the XEC-1000's role in multi-amplifier car audio systems and its hi-fi capabilities.
Details FCC compliance and user guidance regarding potential radio and TV interference.
Details linear phase filters, hi-fi capacitors, phase inversion, and mid-cut controls.
Covers voltage requirements, environmental considerations, and potential interference issues.
Details level controls, crossover point selectors, and basic function selectors.
Explains phase inversion switches and the SUB-WOOFER STEREO/MONO selector.
Explains Low Boost, Rear Mid Cut, and Front Mid Cut controls with Q factor adjustments.
Describes the Sub-Woofer and Front Input selectors and their impact on system configuration.
Lists and identifies all input and output connectors for various audio signals.
Illustrates a system with five power amplifiers, multiple speaker types, and various head unit outputs.
Details a typical 4-speaker system configuration with four amplifiers and selector settings.
Shows configuration for a system using a single pre-amplifier output from the head unit.
Provides a step-by-step guide for securely mounting the unit in a vehicle's trunk compartment.
Details essential guidelines for safe and proper power and ground connections to the car battery.
Illustrates the main power, remote, and speaker wiring connections for the XEC-1000 unit.
Shows the RCA signal connections between the head unit, XEC-1000, and power amplifiers.
Lists detailed technical specifications including crossover frequencies, gain, distortion, and dimensions.
Presents graphical representations of the Bass Boost and Mid Cut frequency response characteristics.
Details the internal signal processing flow and functional blocks of the XEC-1000.
General