Sony XVS-8000-C - Rear Board

4-7. Rear Board
Tip
This section describes the replacement procedure of NET-28 board. This replacement procedure applies to following
boards.
• CN-3807 board
• CNI-43 board
• CNO-43 board
• NET-28A board
Procedure
1. Remove the two screws, then remove the NET-28 board holding the handles.
NET-28 board
PSW
3 x 6
PSW
3 x 6
Spring plate
NET-28 board
Handle
Handle
Note
When installing the NET-28 board, insert making sure the board's upper and lower spring plates do not catch on
the board.
XVS-8000-C/XVS-8000
4-10