Sony XVS-8000-C

To Next Page

To Previous Page

2. Remove the CN-3825 board.

(1) Open the four clampers, then release the four harnesses.

(2) Disconnect the four harnesses from the four connectors (CN001, CN02, CN003, CN004) on the CN-3825

board.

(3) Remove the three screws, then remove the CN-3825 board.

PSW3 x 6

Harness

CN001

CN003

CN004

CN002

Clamper

CN-3825 board

Clamper

3. Install the removed parts by reversing the steps of removal.

XVS-8000-C/XVS-8000

4-15

Sony XVS-8000-C - Page 43