23
To reestablish connection
Close the dialog box.
Entering the forced standby mode
If the controller PC hangs, for example, you can
force Display Controllers and Display Cabinets
into standby mode.
1 Press and hold the power switch on the
Display Controller for at least 5 seconds.
The forced standby mode is entered, and the
POWER indicator lights red.
2 Press and hold the power switch again for
about 2 seconds.
After the POWER indicator blinks red/orange,
the normal standby mode is entered.
The Display Cabinets will also enter the
normal standby mode.
To Next Page
Loading...
