Sony ZRD-C12A - 2 D Inputs; Cleaning and Storage; Display Cabinets; Display Controllers

26
Cleaning and Storage
Display Cabinets
Do not wet the surface of the Display Cabinets.
Daily cleaning
• Use a soft anti-static cloth that does not
produce lint when cleaning the surface of the
Display Cabinets. (Recommended cloth: savina
MX wiping cloth made by KB SEIREN, LTD.)
• Use ethyl alcohol (near 100%) to clean stubborn
stains on the surface. Do not use any other
solvents.
• Use commercially available anti-static dust
blowers to clean joints.
Storage (for transportation)
• Make sure the Display Cabinets are completely
dry before packing them.
• Store the Display Cabinets in dry, well-
ventilated environments.
Display Controllers
Daily cleaning
• Use a cloth that has been dampened with a
neutral detergent and thoroughly wrung out to
wipe the device clean. Never use solvents, such
as benzene and thinners.
Storage
• Do not store in environments where
condensation may occur inside the device.
Signal Formats
The system supports the following video signals.
2D Inputs
DisplayPort (Single Input)
DisplayPort (Dual Input)
Caution
Resolution Input
frame
rate
1)
Input bit
length
Input color
sampling
3840 ×
2160
2)
60p/50p/
30p/25p/
24p
8-/10-bit RGB 4:4:4
2560 × 1440 60p 8-/10-bit RGB 4:4:4
1920 × 2160
120p
2)
/
100p
2)
/
60p/30p/
25p
2)
/
24p
2)
8-/10-bit RGB 4:4:4
1920 × 1080 120p/100p/
60p/50p
8-/10-bit RGB 4:4:4
Resolution Input
frame
rate
1)
Input bit
length
Input color
sampling
3840 ×
2160
2)
120p/100p 8-/10-bit RGB 4:4:4