Sony ZRD-C12A - Display Controllers

25
Display Controllers
Errors
Warnings
Error code Category Description Solution
001 Power CPU power supply error Contact your local Sony
representative.
002 VIF power supply error
003 PIF power supply error
012 Temperature VIF temperature error Check the device environment and
remove any obstructions from the fan
and intake vent. If the problem
persists, contact your local Sony
representative.
013 PIF temperature error
023 Board determination PIF determination error Contact your local Sony
representative.
050 System System version error
Warning code Category Description Solution
212 VIF Temperature warning Check the device environment and
remove any obstructions from the fan
and intake vent. If the problem
persists, contact your local Sony
representative.
213 PIF
214 PS
215 Fan (Front) Rotation stop warning / speed
warning
Check the device environment and
remove any foreign objects that may
be obstructing the fan. If the problem
persists, contact your local Sony
representative.
216 Fan (Rear)
230 System Controller configuration data
mismatch warning
Check the LED pitch size of the display
cabinet, the installation conditions
and wiring conditions including the
model names, and the settings of the
Display Control Software. If there is no
problem, turn the power back on. If
the problem persists, contact your
local Sony representative.
233 PIF VIF signal connection warning / Link
connection warning / Sync
connection warning
240 System Update warning (CPU / VIF / PIF) Perform update again. If the problem
persists, contact your local Sony
representative.
401 Auto Power Saving Auto power saving warning Input a signal to the selected input, or
set [System Setting] - [Auto Power
Saving] to [OFF] in Display Control
Software (without a signal, the unit
will automatically be in standby mode
to save power).