Help Guide
Digital Camera
ZV-1F
Basic icons displayed on the monitor
This section describes the screen display when the shooting mode is
(Program Auto).
The examples are of the display when the screen is in the all-information display mode.
The displayed content and positions are for reference only, and may differ from the actual display. Some icons may
not be displayed depending on the camera settings.
During movie recording
During still image shooting
[
Shoot Mode] is set to [Program Auto].1.
Memory card2.
Recordable movie time3.
[
File Format] is set to [XAVC S HD] and [Rec Frame Rate] is set to [60p].4.
[Record Setting] is set to [50M 4:2:0 8bit].5.
[
SteadyShot] is set to [On].6.
Remaining battery level7.
Switches between recording and standby when shooting movies.8.
Opens the setting screen for the zoom magnification.9.
Switches to the playback mode. (The shot mark button will be displayed during movie shooting, and you can add a
shot mark to the movie currently being recorded.)
10.
[Icon Touch Function] is set to [On].11.
[
Creative Look] is set to [ST].12.
[Product Showcase Set] is set to [Off].13.
[
Self-timer] is set to [10 s].14.
[
Exposure Comp.] is set to [+0.3].15.
Shutter speed16.
Actual movie recording time17.
Aperture value18.
Shooting standby19.
Exposure compensation20.
[Audio Level Display] is set to [On].21.
[
ISO] is set to [ISO AUTO]. (The ISO value automatically set by the camera is displayed.)22.
To Next Page
