Help Guide
Interchangeable Lens Digital Camera
ZV-E1
Exposure Comp. (still image/movie)
Normally, exposure is set automatically (auto exposure). Based on the exposure value set by auto exposure, you can
make the entire image brighter or darker if you adjust [
Exposure Comp.] to the plus side or minus side, respectively
(exposure compensation).
Hint
Only a value between -3.0 EV and +3.0 EV with the equivalent image brightness appears on the screen when shooting. If you set
an exposure compensation value outside this range, the image brightness on the screen will not be affected, but the value will be
reflected in the recorded image.
You can adjust the exposure compensation value within the range of -2.0 EV to +2.0 EV for movies.
Note
You cannot perform the exposure compensation in the following shooting modes:
[Intelligent Auto]
[Scene Selection]
When using [Manual Exposure], you can perform the exposure compensation only when [
ISO] is set to [ISO AUTO].
If you shoot a subject in extremely bright or dark conditions, or when you use the flash, you may not be able to get a satisfactory
effect.
( Exposure Comp.) on the control wheel → press the left/right side of the control wheel or turn the
control wheel, and select the desired setting.
+ (over) side:
Images become brighter.
- (under) side:
Images become darker.
You can also select MENU →
(Exposure/Color) → [Exposure Comp.] → [ Exposure Comp.].
When [Touch Operation] is set to [On] and [Footer Icon Touch] is set to [On], you can change the exposure
compensation values using touch operations.
You can adjust the exposure compensation value within the range of -5.0 EV to +5.0 EV.
You can confirm the exposure compensation value that you set on the shooting screen.
1
To Next Page
Loading...
