Help Guide
Interchangeable Lens Digital Camera
ZV-E1
Marker Display
While shooting movies, you can set whether or not to display markers on the monitor, and select the types of marker.
Menu item details
Marker Display:
Sets whether or not to display markers. ([On] / [Off])
Center Marker:
Sets whether or not to display the center marker in the middle of the shooting screen. ([Off] / [On])
Aspect Marker:
Sets the aspect marker display. ([Off] / [9:16] / [4:5] / [1:1] / [4:3] / [13:9] / [14:9] / [15:9] / [17:9] / [1.66:1] / [1.85:1] /
[1.91:1] / [2:1] / [2.35:1] / [2.39:1])
Safety Zone:
Sets the safety zone display. This becomes the standard range that can be received by a general household TV. ([Off] /
[80%] / [90%])
Guideframe:
Sets whether or not to display the guide frame. You can verify whether the subject is level or perpendicular to the ground.
([Off] / [On])
Hint
You can display several markers at the same time.
Position the subject at the cross point of [Guideframe] to ensure a balanced composition.
Note
The markers are displayed when the Still/Movie/S&Q switch is set to
(Movie) or S&Q (S&Q Motion), or when shooting
movies.
You cannot display markers when using [Focus Magnifier].
The markers are displayed on the monitor. (You cannot output the markers.)
5-048-827-11(1) Copyright 2023 Sony Corporation
MENU →
(Shooting) → [Marker Display] → Select a menu item and set the desired parameter.
1
To Next Page
Loading...
