Note
While USB streaming is in progress, the camera is always set to the movie recording mode regardless of the position of the
Still/Movie/S&Q switch.
You cannot do the following while USB Streaming is running.
Transition to the playback screen
Network functions (PC remote, remote operation from a smartphone, Bluetooth function, etc.)
The following functions are disabled while USB Streaming is running.
Picture Profile
Power Save Start Time
Auto Monitor OFF
When you connect the camera to a device using the USB 2.0 standard, the resolution and frame rate of the streaming video
become set to HD (720p) 30p/HD (720p) 25p.
When performing USB streaming at the following resolutions and frame rates, use a computer that supports SuperSpeed USB 5
Gbps (USB 3.2) and a commercially available USB cable.
4K (2160p) 30p, 4K (2160p) 15p, HD (1080p) 60p, HD (1080p) 30p
Even if the above values are set, the actual output will be HD (720p) 30p when connected using the USB 2.0 standard.
If you change the settings for the following items during USB streaming, the streaming screen may pause temporarily. You may
also need to resume streaming from an application depending on the livestreaming service.
[Output Res/Frame Rate] or [Movie Rec During Streaming] under [
USB Streaming]
[
File Format]
[Auto Framing Settings]
Related Topic
USB Connection Mode
5-048-827-11(1) Copyright 2023 Sony Corporation
To Next Page
Loading...
